Algid Technology



    Applications

     
    PCI-E Solid State Disk         █ Networking Product
     
    Driving Recoder        █ Smart Phone Housing
     

     

  •  


     
    █ PCI-E Solid State Disk
     
        The m.2 interface and the nVME SSD using PCI-E bus bar are always the representatives of the very high speed of the hard disk presently. But because of the small board area and the narrow upper and lower space, the high heat generated is difficult to solve by using the traditional large volume heat dissipation aluminum heatsink or fans.
        In the narrow space of the notebook, the use of high-performance graphene sticker on the SSD, can lower the temperature 5-15 degrees C, SSD can not only maintain high-speed read and write, but also to extend the life of memory.
        Even larger space on a desktop PC, sometimes m.2 slot may be located in the back of a motherboard or bus below, the aluminum heat-sink is not easy to install, but thin graphite sticker can easily paste and without any limitation.

     
    The use of graphene radiators in the notebook and PC, the actual cooling effect of 5-15 degrees C.



    Back to content
     

     


     
    █ Networking Product
     
        With the speed of Networking products going higher and higher, the heat generated by the internal chips has been increasing as well, even no airflow in the harsh environment, graphene plating on aluminum film, the cooling effect can be achieved than the simple use of aluminum anode heat sink low3-8 degrees C,bring great convenience for the thermal design.

     
    The actual test temperature decreased by 3-8 degrees C after the graphite coating was plated with the aluminum radiator.


    Back to content
     

     


     
    █ Driving Recoder
     
        The small volume of driving recorder is designed by high-speed image compression. The installation of DVR is directly exposed to sunlight under the windshield and it is not easy for the thermal design. High radiation graphene paint can maintain good heat dissipation and does not affect the design of mechanism and ID.

     
    The small volume and exposed to sunlight, the interior of the shell is sprayed with graphene paint.



    Back to content
     


     
    █ Smart Phone Housing
     
        Products that are directly contacted with skin, can use high thermal conductive plastics and sprayed Graphene Thermal Paint on the surface, which can lower the temperature and enhance the texture of products. For example, smart phone and handheld portable gaming console.

     
    On the surface of the back housing cover of the mobile phone, spray Graphene Thermal Painting first, then the base paint and the color coating on the surface go next.



    Back to content
     

     





    Algid Technology


      
    Algid Technology Co., Ltd.

    HomeContact us

     Address:2F-1, No.293, Fuxing S. Rd., Da'an Dist. 116, Taipei City, Taiwan.
     Tel:886-2-8663-3304
     Fax:886-2-2934-3195
    *About consumer related product or request, please perform your message with「contact us」sheet, we will contact you as soon as possible.

    ©2018 All rights reserved.

    HomeContact us



    •